the car above has gone through a lot. however, let's just focus on the diet program its been on since i got the car nearly 3 years ago. i shall introduce you, the reader to my thesis/final year project which is currently underway where i am designing a lightweight lower control arm replacement for the proton putra.

since i started autocrossing, i've been a fanatic at keeping the weight down as much as i can. and what i've done thus far is remove most of the sound deadening material although there's still some left on the cabin-side of the firewall, most of the insulation material, carpets, plastic trimmings, roof liner, back seats, radio, speakers and antenna, stock air filter box and replaced the driver-side recaro njoy to a sscus non-fia bucket seat and finally replaced the stock muffler with a 2.1" ID pipe. believe it or not, removal of these items has reduced the weight by approximately 40kg. so, from the kerb weight of the car which is ~1050kg, it has now dropped to 1010kg.
on race day, the weight drops by another 35kg with the removal of the passenger-side recaro njoy (notice the torn parts? mum's trying to stitch them back to save me RM450 so results will be posted when she's done with it.);

and the spare wheel plus the tools required to jack the car and change it.

the items mentioned weighed in at 16kg for both the njoy and the spare wheel and about 3kg for the tools. this brings the weight of the car further down to 975kg.
now, why should we reduce the weight of a vehicle? take a look at the proton wira which had a kerb weight of 1050kg 12 years ago when it was first introduced and look at its replacement the proton persona which weighs 1170kg. bare in mind, both wira and persona compared are the baseline 1.6 models with automatic transmission and no ABS. where does this weight come from? it can't be from the slight increase in length (~10cm longer than the wira) but it could be from the added safety and luxury items due to customer demands and advancement in automotive safety.
now if we can reduce the weight, what can we benefit?
1. improved car handling characteristics (Puhn, 1976)
2. fuel savings (Borns & Whitacre, 2007)
3. decrease environmental impacts from reduced CO2 emissions
4. increase in engine performance
just to brush the surface of my points, Fred Puhn states in his book that reducing the sprung and unsprung mass of a car would result in better handling. handling consists of not only cornering or maneuverability of the car but also breaking performance of the car.
fuel savings as mentioned by these two Alcoa Industries reps, have been proven by companies like BMW who have reduced the weight of a test car by 10% and thus experience better fuel consumption by providing 2.5 extra miles per gallon. due to this reduction in fuel usage, impact on the environment from vehicles can be reduced from the reduction in CO2 or NOx gases due to internal combustion engines. since fossil fuel is not a renewable source of power, this reduced fuel consumption would enable our fossil fuel reserves to last just a little bit longer.
on a more personal note, i have experienced quicker engine response due to this reduction in weight due to the fact that the lighter the car (ie. less mass) the less load there is on the engine to propel the car to a predetermined speed like the 0-100 kph time for example.
tune in next time when i discuss the topics of interest regarding my thesis.
ps. all SSG batch mates, there'll be a Alumni dinner in SSG hall

this hall, on the 29th of September, 2007 and all the teachers and current principal would appreciate if we, the pioneer batch of SSG would attend this dinner. have to buy tickets though at RM50 i think. to purchase these tickets, just head to SSG's Principals office and look for his secretary.